Low power compact and light weight VHF 2M TX .
The output power =100mw@.5VDC.
Apart from a couple of Hertz drifting on start-up.
I was impressed with the frequency stability.
In testing I found it easy to forget that this TX is just pro-type module !.
Stability led me to connected my sound-card with UISS beacon on !.
On other side of the bound (ie cross the workbench) I've copied every single beacon frames.
Did I hit the ISS with this low power ?? GOK.
Next pass,I'll try to hook it to the Yagi :-))
Showing posts with label TNC. Show all posts
Showing posts with label TNC. Show all posts
June 16, 2013
May 22, 2013
Baycom Modem !
A simple modem that functions the same as the classic "dumb" Baycom Modem.
For modulation a monolithic phase-locked loop (PLL) IC xr2211 used.
The demodulation XR-2206 a monolithic function generator was used .
Calibrate the Mark tone 1200Hz at low TXDATA level , and
the space @ 2200Hz at high TXDATA .
Why do I need to build such an old style modem ?
1st because it a piece of the digital communication history .
2nd its a very good demo tool for the digital modulation topics.
For modulation a monolithic phase-locked loop (PLL) IC xr2211 used.
The demodulation XR-2206 a monolithic function generator was used .
Calibrate the Mark tone 1200Hz at low TXDATA level , and
the space @ 2200Hz at high TXDATA .
Why do I need to build such an old style modem ?
1st because it a piece of the digital communication history .
2nd its a very good demo tool for the digital modulation topics.
March 3, 2013
STRaND-1 Received with Kantronic 9612 Plus and IC-910.
16:23 16:37 UTC
Orbit # 72
STRaND-1 Received with Kantronic 9612 Plus and IC-910.
Setup steps:
1st put the TNC in KISS mode.
Start Hyperterminal
Select TNC Port # and other setting 9600,N,8,1.
@ CMD type
|2b to switch to 9600 port.
Intface kiss.
Reset.
Disconnect the Hyper-terminal .
Start OnlineKiss v8.4.0
Select TNC Port # and other setting 9600,N,8,1.
Rig with Doppler correction.
Remember to turn the 9600 bps data transmission on.
Track and receive.
I use the previous OnlineKiss version 8.2.2 to exit the KISS mode by
click (Set TNC in CMD mode ) bottom.
after the pass, kissfile created at OnlineKiss.exe dir.
Use Kissdump or other decoder to display a KISS Files
OnlineKiss v.8.4.0 (the latest version ) works fine with Kantronics 9612 plus .
STRaND1 MODEM BEACON - Help me OBC Kenobi.
C0 10 DB DC 80 61 06 01 E0 00 00 07 26 C0
C0 10 01 E1 00 00 00 06 C0
C0 10 01 E3 00 00 00 00 C0
C0 10 01 E2 00 00 29 35 C0
C0 10 01 E4 00 00 00 00 C0
C0 10 DB DC 80 63 06 01 E0 00 00 07 26 C0
C0 10 01 E1 00 00 00 06 C0
C0 10 01 E3 00 00 00 00 C0
C0 10 01 E2 00 00 29 3D C0
C0 10 01 E4 00 00 00 00 C0
C0 10 DB DC 80 64 2E DB DC 53 54 52 61 4E 44 31 20 4D 4F 44
45 4D 20 42 45 41 43 4F 4E 20 2D 20 48 65 6C 70 20 6D 65 20
4F 42 43 20 4B 65 6E 6F 62 69 0D 0A DB DC 00 C0
MODEM BEACON - Help me OBC Kenobi..
December 7, 2010
December 2, 2010
MY HOMEBREW PIC TNC.
In 2005 Bob Ball published an article in QEX magazine about a modem-less TNC using a PIC microcontroller.Here is my version.
Subscribe to:
Posts (Atom)