WE WISH decoder

Thanks Mike DK3WN for the new WE WISH packet data decoder . Great Job OM .

                    

WE WISH packet frames.

WE WISH HK DATA
 The beacon is a mix of cw and packet frames - this clip contain only the packet frames .
  
                 

Ohayou(JA-Time) Mike san , Nader san
TNX Soft Mike san and enjoy trip.
GD RCV Nader san,
I decoded the sound of your Blog.
 I sent Image.

 Dewa Tetsu JA0CAW

WE-WISH - BEACON MODE

More info see Here
See a short video clip

                    

WE-WISH CW TLM

                        

How to decode WE_WISH SSTV (Revision)

How to decode WE_WISH SSTV

https://sites.google.com/site/jq1ziijq1zij/english


How to decode WE_WISH SSTV

JE9PEL, I explain a method of the decoding WE_WISH SSTV photo received ST2NH.
Because there is only a Japanese software and PDF file, I do not know whether
you can analyze it by a method to explain here properly in English. Please test.

(*) In the PDF file writing on how to use WE_WISH decoder, the way of
    the temperature setting seems to include some error. In other words
    the ruggedness of the 3D image of SSTV which I explained in my home
    page might be against all so far. Please wait for a while, because
    I am asking GS a question now.

(**)I corrected here the explanation of the last page in the PDF file of
    WE_WISH SSTV. This was comfirmed in Ground Station as above.


 1. You will get a clean red and a yellow photo of the infrared signal using
    MMSSTV. Save this image as the BMP file. And you will notice some curved
    lines at the center of the image. I do not know what it is.

 2. Install Decoder and PDF file from Japanese homepage of WE_WISH GS.
    https://sites.google.com/site/jq1ziijq1zij/home/shou-xin-fang-fa
    https://sites.google.com/site/jq1ziijq1zij/english, English page

 3. Set BMP file which you saved first in the column of this decoder.

 4. Set two CFG file 'AMB20-OBJ20_Cal.dat' and 'AMB20-OBJ40_Cal.dat' etc.
    Input temperature value in two columns of this decoder, and run it.
    See the next image for example.
    http://www.ne.jp/asahi/hamradio/je9pel/st2nhtv1.png

 5. The CSV file is generated in the folder automatically.
    It is 'st2nhstv_OUT.csv' for example.

 6. Open this CSV file using a tool Graph-R 2.30 'GraphR.exe'.
    http://www.vector.co.jp/soft/dl/winnt/business/se136959.html

 7. You will decode them as follows.
    http://www.ne.jp/asahi/hamradio/je9pel/st2nhtv2.png
    http://www.ne.jp/asahi/hamradio/je9pel/st2nhtv3.png


AW: We-Wish SSTV by DK3WN

 19:45UTC, 10 Oct 2012 by DK3WN (before correction)

 http://sphotos-f.ak.fbcdn.net/hphotos-ak-prn1/155640_4824859186488_213597516_n.jpg
 http://heiseiturezuregusa.blog.ocn.ne.jp/a/2012/10/1011_4816.html

 20:32UTC, 11 Oct 2012 by DK3WN (before correction)


    
 You can see the gradient boom.         After correction by JA0CAW


[Supplement]

Subject: SSTV
From: Nader Omer
To: mineo waketa je9pel
Date: Tue, 9 Oct 2012 15:11:04 -0700 (PDT)

Hello dear Mineo
I've received SSTV photo from We Wish satellite .
I've noticed some curved lines at the center of the photos
as I've seen those line too at JA0CAW sstv photo!
see attached images please
I wounder what are those lines?
How can I decode we wish sstv images ?

Thanks in advance dear friend
73's, Nader, st2nh

---------------------
Subject: We-Wish SSTV
From: Mike Rupprecht
To: Mineo Wakita
Date: Wed, 10 Oct 2012 13:45:50 +0200

Dear Mineo san,
I received a new SSTV image from We-Wish. Can you explain me,
what we see in the image?

I know it's an infrared or thermal image - but of what.
Is it inside the cube or outside to earth?
I did not found any english informations about that.
Maybe you can help me, please?

Thanks ! 73 Dewa,
Mike, DK3WN

---------------------
Subject: We-Wish SSTV
From: Mineo Wakita
To: Nader Omer, Mike Rupprecht
Date: Wed, 10 Oct 2012 20:48:03 +0900

Please set up as above after the correction.
JE9PEL, Mineo Wakita

---------------------
AW: We-Wish SSTV
From: Mike Rupprecht
To: Mineo Wakita
Date: Thu, 11 Oct 2012 13:44:38 +0200

Dear Mineo san,
I managed to get the temperature gradient.
I forgot to type in the values for H and L rangec

I should better learn japanese language, hihic

73 Dewa,
Mike

----- Ursprungliche Nachricht -----
Betreff: Re: We-Wish SSTV
Von: Mineo Wakita
An: DK3WN
Gesendet: Donnerstag, 11. Oktober 2012 13:41

In the PDF file writing on how to use WE_WISH decoder, the way of
the temperature setting seems to include some error. In other words
the ruggedness of the 3D image of SSTV which I explained in my home
page might be against all so far. Please wait for a while, because
I am asking GS a question now.

JE9PEL, Mineo Wakita  wesite

WE_WISH English Page

次>>

WE_WISH English Page ― 2012年10月13日 11時11分

PDFファイルの英語版が公開されました。
こちらは datファイルの(高温),(低温)の設定の仕方が正しく記載されています。
https://sites.google.com/site/jq1ziijq1zij/english

by JE9PEL Blog

How to decode WE_WISH SSTV

How to decode WE_WISH SSTV ― 

WE_WISH 赤外線画像を解析する方法について、外国局から質問メールが来ました。
この SSTV信号は世界中で受信されています。しかし 管制局HPには、English の
ページはあるものの 未だ Coming Soon の状態で、デコーダーも PDFファイルも
英語版は用意されていません。そこで僭越なのですが、次の返信を自局の方から
送信いたしました。しかし、すべてが日本語対応なので、下記の手順を踏んでも
恐らく外国局にはデコードすることは無理でしょう。何とか改善をしたいですね。

JE9PEL, I explain a method of the decoding WE_WISH SSTV photo received ST2NH.
Because there is only a Japanese software and PDF file, I do not know whether
you can analyze it by a method to explain here properly in English.

 1. You will get a clean red and a yellow photo of the infrared signal using
    MMSSTV. Save this image as the BMP file. And you will notice some curved
    lines at the center of the image. I do not know what it is.

 2. Install Decoder and PDF file from Japanese homepage of WE_WISH GS.
    https://sites.google.com/site/jq1ziijq1zij/home/shou-xin-fang-fa
    I put the same program in English 'wishsstv.exe' in my homepage.
    http://www.ne.jp/asahi/hamradio/je9pel/wishsstv.exe

 3. Open two CFG file 'AMB20-OBJ20_Cal.dat' and 'AMB20-OBJ40_Cal.dat' etc.
    Input temperature value in two columns of this decoder.
    See the next image for example.
    http://www.ne.jp/asahi/hamradio/je9pel/st2nhtv1.png

 4. The CSV file is generated in the folder automatically.
    It is 'st2nhstv_OUT.csv' for example.

 5. Decode this CSV file using a tool Graph-R 2.30 'GraphR.exe'.
    http://www.vector.co.jp/soft/dl/winnt/business/se136959.html

 6. You will decode them as follows.
    http://www.ne.jp/asahi/hamradio/je9pel/st2nhtv2.png
    http://www.ne.jp/asahi/hamradio/je9pel/st2nhtv3.png

Thanks  Mineo JE9PEL 
Sourse JE9PEL Blog