WiSP hints #4 test TNC -RIG -PC keying line

After hardware wiring of the TNC Rig with the PC
do the following to test the Keying line.

GSC--> Tracking--> Run pass --> select satellite --> OK

MSPE window wll pop up ,If every thing is ok you wll notice the TNC
LEDs blink three time = TNC in KISS Mode.

If there is an error message check again the ports and TNC setup .

On MSPE click fill --> small window pop up for different requests.

Chose fill directory --> and click ok your rig suppose to transmit
a frame of packet.

Now Use other radio and listen to confirm the transmission is ok.