Yahhhh To much setup!!
Here is a simple test for WISP and the PC ports!
1-Download and insulate ComEmulDrv3.
2-Create 2 virtual ports.
3-Use one port for Wisp and the other port for Winpack.
5-Select TNC-2 at wisp !!
6-No TNC to be select at Winpack!
7-Match all other parameters Speed/Parity/Bits etc
4-Run a pass.
5-Click fill.
6-See what wisp transmiting on Winpack !!
7-Good luck with your ports and software .
No comments:
Post a Comment